Excavator Bearing Wholesaler in China

crawler guide bearings

Table Of Content

If you want to find reliable Excavator Bearing Manufacturers in CHINA, check this post. We give you a comprehensive introduction to Excavator Bearing.

Introduction of Excavator Bearing

The installation and disassembly method of excavator bearing should be based on the structure of excavator bearing, size, and the nature of the excavator bearing parts. The installation and disassembly pressure should be directly applied to the end face of the closely matched excavator bearing ring. The pressure can not be transmitted through the excavator bearing roller, as this will cause indentation on the working surface of the excavator bearing, the influence excavator bearing normal work even can cause the excavator bearing damage. The Cage, seal ring, dustproof cover, and other parts of the excavator bearing are easily deformed. The pressure of installing or disassembling the excavator bearing can not be put on these parts.

Application of special angular contact ball bearing in an excavator. This angular contact ball bearing has a larger contact angle (40 degrees), so it can bear a larger axial load and axial combined radial load. And it can carry a heavier load than a bearing of the same size because there are more balls in it. It is widely used in all imported excavators. Bearings of high accuracy, low noise, long life, and this kink are widely used in excavators. Mainly used in God steel excavators, Komatsu excavators, crawler excavators, Kato excavators, Hitachi excavators, Daewoo excavators, modern excavators, Volvo excavators, etc.

excavator bearings 1 1

Crawler Guide Bearing

Excavator bearing is our common bearings, the quality of direct impact on the life of excavator bearing, while the material is also a direct factor affecting the excavator bearing failure.

Under the normal working condition, the normal operation of the excavator bearing also has the factor to cause the excavator bearing to fail in advance, the excavator bearing failure has many reasons, all the factors affecting the design and manufacture process are related to the bearing failure, which is difficult to judge by analysis.

The use factor mainly refers to the installation adjustment, the use maintenance, the maintenance repair, and so on whether conforms to the technical request. The installation condition is one of the most important factors in use. The improper installation of the excavator bearings often causes the stress state of the whole excavator bearing components to change, excavator bearings in the normal state of operation, and early failure.

Excavator Main Bearings

Excavator bearings include Excavator walking bearing, excavator rotating bearing, excavator needle bearing, excavator gearbox bearing, excavator walking motor bearing, excavator walking drive bearing, excavator joint bearing, slewing support bearings for excavators, and inch non-standard bearings for excavators.

excavator bearings
Excavator Bearing

Excavator Bearing Hs Code

Import Data of excavator bearing under HS Code 84828000

Excavator Bearing Installation

(1) improper adjustment of gear shifting device. If the transmission of the excavator adopts mechanical manual shift mode, if the transmission lever, longitudinal axis, horizontal axis, and vertical fixing screw are loosened, the transmission may “Jump”. Wear of transmission mechanism

(2) the sudden change of the external load, because of the working nature of the excavator and the design reason of the excavator itself, the sudden change of the external load will also cause the transmission to “Jump”. When the road surface is uneven, the excavator drives downhill or the outside load changes suddenly due to improper driving route, this kind of sudden change of load can act on the gear of the transmission through the wheel and the transmission shaft, and cause the gear of the transmission to break off because of the axial thrust, causing the transmission to “Jump”. Performance degradation of self-locking mechanism

(3) the transmission mechanism of the gear-shifting device of the excavator realizes gear-shifting by means of the sliding gear sleeve moving axially on the fixed gear sleeve and engaging with the driven gears of each gear. In the process of frequent gear shifting, the tooth surfaces of the above-mentioned meshing gears are easy to be ground into a conical shape, which results in the reduction of meshing performance and “Gear jumping”.

(4) in order to prevent the transmission of “Jump gears”, the excavator has installed self-locking steel balls and springs in the box to cover holes above the II, III, IV, and V shift fork shafts of the transmission, and in the I and reverse shift forks. The self-locking performance of the self-locking mechanism will decrease until it disappears when the spring of the self-locking mechanism weakens or breaks, resulting in the transmission of “Jump gears”. At the same time, if wear occurs in the groove on the locating ball or the shifting fork shaft, it may also cause the transmission to “Jump gears”.

(5) the operation method is improper, when the excavator is running on the ramp (especially on the downhill), if the operation is improper, it will also cause the transmission of “Jump gears”.

NSK Excavator Bearings

nsk excavator bearings

NSK Excavator Bearings

NTN Excavator Bearings

ntn excavator bearings
NTN Excavator Bearings

Excavator Bearing Catalog

Part NO.
ID(mm) OD(mm) H(mm)
184BA-2251 184 226 21
180BA-2256 180 225 22
AC5033 250 330 37
AC5836 289 355 34
AC463240 230 320 40
AC4615 230 300 35
AC4629 230 290 27
AC4531 225 315 36
AC4631 230 310 40
AC423040-1 210 300 40
AC4630 230 300 35
AC6037-1 300 370 34
AC523438-1 260 340 38
BA152-2306 152 230 26
BA222-1WSA 222 273 26
BA220-6SA 220 276 26
BA220-6WSA 220 276 26
BA240-3ASA 240 310 32
BA289-1A 289 255 34
BA260-3A 260 340 38
BA260-4A 260 340 38
BA200-10 200 280 38
BA230-7T12SA 230 300 35
BA4531 225 315 40
BA300-5A 300 380 40
BA180-4WSA 180 250 33
200BA27V-2 200 270 33
210BA29V 210 295 35
230BA27V2 230 300 35
BA280-2SA 280 370 40
BA300-4WSA 300 395 52
BD130-1SA 130 166 34
BA205-1A 205 295 40
BA246-2A 246 313 32
BA250-4A 250 330 37
BA290-3A 290 380 42
120BA16 120 165 22
180BN19 180 250 33
B-SF4454PX1 220 295 33
B-SF4444PX1 220 295 33
SF4815VPX1 240 310 34
SF4831PX1 240 310 33.4
SF4852PX1 240 310 33
SF4826PX1 240 310 33
SF3607PX1 180 225 15
SF2812PX1 140 175 17.5
SF3227PX1 160 200 20
SF3235PX1 160 200 20
SF4007PX1 200 250 25
SF4019PX1 200 260 30
SF4860PX1 240 320 38.6
SF6037-1 300 370 34
SF6015PX1 300 372 36
260BA355-2 260 355 44
CR4411PX1 220 290 32
CR6016PX1 300 380 38
BA230-7T12SA 230 300 35
LL639249/10 196.85 241.3 23.812
L540049/10 196.85 254 28.575
LM739749 196.85 257.175 39.688
544090/116 228.6 295.275 33.338
544091/118 231.775 300.038 33.338
L540048/10 200 254 28.575
561904P6X 120 170 27
36990/20 177.8 227.012 30.165
4T-T7FC065ST 65 130 37
4T-T7FC055ST 55 115 34
T2ED045-1 45 95 36
R196Z-4 196.85 241.3 23.812
AC563946AB 280 390 46
SF5235 260 330 35
AC4833
HS05154 126 154 14
AC563946AB 280 390 46
BN220-1 220 280 28
BD130-16 130 166 40
310BN420 420 310
BA345-1 345 470 45
BA195-3A 195 280 36.5
BD155-3A
BD155-4A 250 330 37
BD155-5A 165 210 54
BD155-6A 155 198 47
BA120-7 230 300 35

Excavator Bearing List

180BA-2256 20316 BA230-7ASA BA260-6
184BA-2251 BA270-3 SF3607 AC463-240
BA220-6SA SF6015PX1 BA180-4BWSA SF4831VP-1
AC5631 BA190-3 AC4531 SF2812VP-1
AC4631 BA246-2A 180BN19W SF3607VP-1
AC523438-1 BA205-1 200BA27V-2 SF4007VP-1
BA222-1WSA 245BA35S1 210BA29V SF3235VP-1
AC5836 135BA170 AC423040-1 SF4444VP-1
BA240-3ASA SF3227PX1 AC4630 SF4411VP-1
AC5033 SF3235PX1 BA280-2SA BD230-16A
SA0330 SF3227VP-1 BA300-4WSA BD185-6A
R196Z-4 220BA300 BD130-1SA BD200-6A
AC4831 150BA182 BN220-1 L435049/10
L639249/10 BA250-4A CR6016PX1 LM739749/10
LL735449/10 CR4411VPX1 SF2812PX1 LM446349/10
L540049/10 140BA180 SF4007PX1 M348449/10
BA289-1 BA152-2036 SF4019PX1 M349549/10
AC6037 AC463240 BA4531 LL639249/10
BA260-3A HS50145 260BA355-2 NBA16519αPK1
BD165-6 HS05154 120BA16 BA300-6A
SF4852PX1 HS05383 BA230-7A CR4416PX1
SF4815 MC6034 BA210-10 LL225749/10
SF5235PX1 B-SF4454PX1 BA300-5 BD130-16A
BA290-3A AC4629 BA230-2A 240BA3251
210BA296 SF5246PX1

Product Description
1.Material:bearing steel
2.Type:Excavator roller bearing
3.Application:Excavator
4.Size:24031032
Product Feature
Roller bearing with Iron,nylon66 cage
Product Specification/Models
B120-16 12016522
BD130-16 13016640
BD130-2 13016634
SF2812VPX1 14017517
HS05154 12615414
B135-6 13517020
SF3235 16020021
SF3227PX1 16020010
BD165-6(3321) 16521058
180B-2256S 18022522
SF3607TVPX1 18022515
B180-4BWS 18025033
180BN19-BTB7936 18025033
184B-2251 18422619
BD185-6 18523251
200B27V-2 20027234
SF4007PX1(B200-7) 20025024
SF4019PX1 20026030
B200-6 20025024
B200-10 20028038
B205-1 20529540
210B27V-2 21029535
C423040-1 21030040
BN220-1 22028028
B220-6S 22027626
SF4411 22029032
CR-4411PX2U6 22029033
SF4444PX1 22029532
SF4454PX1 22029533
B222-1WS 22227326
B230-7S 23030035
B230-2 23032040
C4632 23032040
C4631 23031039
C463240 23032040
SF4615PX1 23030035
BN230-3 23030033
SF4630PX1 23030035
230B30-2 23030033
B240-3R 24031033
B240-5R 24031030
SF4831PX1 24031033
SF4826PX1 24031033
SF4815VPX1 24031032
240B32S1 24032038
SF4852PX1 24031032
245B35 24535542
B246-1S 24630833
C5033 25033036
B250-4(HT1529) 25033038
SF5235VPS1 26033035
B260-4 26034038
C523438-1 26034038
260B-35S2 26035540
B270-3S 27035040
B280-2S 28037040
C5836 29035534
B290-3 29038040
C6015 30037236
CR6016PX1 30039045
MC6034 30034018
C6037-1S 30037033
HS05383 32038330
B300-4WS 30039552
B300-5WS 30038042
R196Z-4S 19624126
LL639249/10 19724225
LL225749/10 12716618
L540049/10 19725428
LM739749/10 19725740
JM738249/10 19226046
4T-735449V1 17821621
LL641149/10 20226130
M348449/10 24834766
310BN42-2 31042045
Application
the bearing are used in excavator travel assembly.
Other Information
all of size are available,aslo can make order to produce.

Final Thoughts

Being responsive and buying these sustainable Excavator Bearing shows we are responsible people and are concerned about HIGH QUALITY and the BEST PRICE.

Up to you now, take that initiative and try out these products by purchasing Excavator Bearing. You will absolutely love all these products and have zero regrets!

Boost your business with our high quality services

Get an instant quote from our most experienced consultants.

Please Input Your Email To Get The

bearing catalogue price list